Wenzhou Zhengyuan Valve Co., Ltd.

Product name：Z41W American Standard Gate Valve

Product category：API gate valve

Information

Product model:
American Standard flange valve
The design and manufacture of the products meet the requirements of American national standard ANSIB16.34, American Petroleum Institute standard AP16D and API600.
Compact structure, small size, good rigidity, safe and reliable sealing.
Closed parts (gate) adopt elastic structure, in the work can automatically compensate for abnormal load or temperature caused by body deformation. Therefore, the sealing is reliable, and the flashboard wedge can not be generated.
Nominal diameter is greater than or equal to NPS1011, pressure class 400 pounds class and nominal diameter greater than NPSS611, pressure level 150~2500 pounds of manual valve, its handling device is equipped with rolling bearings, opening and closing easy.
Material of main material, internal material, stuffing, gasket and fastener can be reasonably assembled according to requirements or actual working conditions.

The seat for lifting the seat, can be any combination of close and seal surface material matching, to meet the conditions required to extend the service life.

Design and manufacture	Structural length	Flange size	Butt welding joint size	Pressure temperature grade	Test and test
AP1 600	ANS1B16. 10	ANSlB16.5a	ANS1B16. 25	ANS1B16. 34	AP1598

Three, American Standard flange valve pressure test:

Nominal pressure	strength test		Water seal test		Airtight seal test
Nominal pressure	MPa	Lbf/in2	MPa	Lbf/in2	MPa	Lbf/in2
150	3. 1	450	2.2	315	0.5~0.7	60~100
300	7.8	1125	5.6	815
600	15.3	2225	11.2	1630
900	23. 1	3350	16.8	2440
1500	38.4	5575	28. 1	4080
2500	64.6	9367	47.4	6873

Four, American Standard flange valve main parts material and performance:

housing	ASTH A216WCB								ASTMA351 CF8
The gate	WCB			CF8		CF8M		Monel	ASTMA351 CF8
The stem	F6a			F304		F316		Monel	F304
Gate seal face	13Cr	13Cr	STL	304	STL	316	STL	Monel	304	304	STL
Seat seal face	13Cr	STL	STL	304	STL	316	STL	Monel	304	STL	STL
housing	ASTM A351 CF3					ADTM A351 CF8M			ASTM A351 CF8
The gate	ASTM A351 CF3					ADTM A351 CF8M			ASTM A351 CF8
The stem	F304L					F316			F316L
Gate seal face	304L			304L	STL	316	316	STL	316L	316L	STL
Seat seal face	304L			STL	STL	316	STL	STL	316L	STL	STL

Five, ANS1 Class~ANS1 Class300 American Standard valve main dimensions:

ANSI Classl50
NFS		2	21/2	3	4	6	8	10	12	14	16	18	20	24	26	28	30	32	36	40	42
L	PF	178	191	203	29	267	292	330	356	381	406	432	457	508	559	610	610	660	711	762	787
L	BW	216	241	283	305	403	419	457	502	572	610	660	711	813	864	914	914	965	1016	1067	1118
manual operation	Hl	400	490	510	585	775	955	1160	1375	1570	1765	1980
manual operation	Do	200	200	250	300	350	350	400	450	500	600	700
Bevel gear	H2	-	-	-	-	-	-	-	-	1668	1920	2115	2215	2600	2908	3046	3136	3293	3726	4060	4229
motor-driven	H3	-	-	-	-	-	-	-	-	1668	1920	2115	2215	2600	2908	3046	3136	3293	3726	4060	4229
ANS1 Class300
NFS		2	21/2	3	4	6	8	10	12	14	16	18	20	24	26	28	30	32	36	40	42
L	RF	216	241	283	305	406	419	457	502	762	838	914	991	1143	1245	1346	1697	1524	1727	-	-
L	BW	216	241	283	305	406	419	457	502	762	838	914	991	1143	1245	1346	1697	1524	1727	-	-
manual operation	Hl	470	525	535	535	305	1025	1230	1460	1645	-	1840	-	-	-	-	-	-	-	-	-
manual operation	Do	200	200	300	300	350	400	450	500	600	-	600	-	-	-	-	-	-	-	-	-
Bevel gear	H2	-	-	-	-	-	-	-	-	-	-	1935	2155	2572	2908	3100	3135	3293	-	-	-
motor-driven	H3	-	-	-	-	-	-	-	-	-	-	1935	2155	2572	2908	3100	3135	3293	3754	4120	4530

Six, ANS1 Class~ANS1 Class600American Standard valve main dimensions:

ANSI Class600

NFS		2	21/2	3	4	6	8	10	12	14	16	18	20	24	26	28	30
L	RF	292	330	356	432	559	560	r87	338	389	990	1092	1194	1397	1448	1549	1651
L	BW	292	330	356	432	559	560	r87	338	389	990	1092	1194	1397	1448	1549	1651
manual operation	H1	474	530	547	ro3	913	1077	1276	1499	-	-	-	-	-	-	-	-
manual operation	Do	250	250	300	350	450	500	500	580	-	-	-	-	-	-	-	-
Bevel gear	H2	-	-	-	-	-	-	-	1470	16250	2089	2211	2616	2921	2960	3050	3112
motor-driven	H3	-	-	-	-	-	-	-	1470	16250	2089	2211	2616	2921	2960	3050	3112

Sever, ANS1 Class~ANS1 Class900 American Standard valve main dimensions:

ANS1 Class900
NFS		2	21/2	3	4	6	8	12	14	16	18	20	24
L	RF	368	419	381	457	610	737	965	1029	1130	1217	1321	1549
L	BW	368	419	381	457	610	737	-	-	-	-	-	-
manual operation	H1	620	705	695	825	1065	1318	-	-	-	-	-	-
manual operation	Do	300	350	350	400	500	600	-	-	-	-	-	-
Bevel gear	H2	-	-	-	-	800	940	1691	1877	2143	2310	2750	3150
motor-driven	H3	-	-	-	-	800	940	1691	1877	2143	2310	2750	3150

Eight, ANS1 Class American Standard valve main dimensions

ANSI Classi500
NPS		2	3	4	6	8	10	12	14	16	18	20	24
L	RF	371	473	549	-	-	-	-	-	-	-	-	-
L	BW	-	-	-	-	-	-	-	-	-	-	-	-
manual operation	Hl	614	705	927	1191	1524	1854	2184	2216	-	-	-	-
manual operation	Do	-	-	-	-	-	-	-	-	-	-	-	-
Bevel gear	H2	-	-	-	1191	1524	1854	2184	-	-	-	-	-
motor-driven	H3	-	-	-	1191	1524	1854	2184	2216	2316	2620	2840	3310

Nine, American Standard Han Park AMS1 ClaSs2500 main dimensions:

ANSI Class2500
NPS		2	3	4	6	8	10	12
L	RF	451	578	673	914	1022	1270	1422
L	BW	451	578	673	914	1022	1270	1422
manual operation	Hl	630	890	-	-	-	-	-
manual operation	Do	-	-	-	-	-	-	-
Bevel gear·	H2	-	-	-	-	-	-	-
motor-driven	H3	-	-	191	1347	1445	1692	1914